Cromocol

FIELDCLIMA Stability Series Container Room - Aralab

Mobile walk-in stability container rooms with precise temperature and humidity control, up to 40,000 L for GxP stability studies and storage. From Cromocol.

Get a Quote
FIELDCLIMA Stability Series Container Room - Aralab

Stability-Grade Climate Performance, Anywhere You Need It

The FIELDCLIMA Stability Series extends Aralab’s walk-in stability expertise to fully self-contained, mobile systems. These container rooms deliver the same controlled temperature and humidity performance as traditional stability chambers, now integrated into 20 ft and 40 ft containers that can be installed outdoors or indoors.

Pre-configured with high-capacity shelving and an adaptive interior layout, the mobile walk-in chambers provide up to 40,000 L of usable volume for stability studies, testing or long-term storage of sensitive products. Environmental conditions are controlled with consistent precision over time, supported by alarms, remote notifications and full electronic records for regulated applications.

A Plug-and-Play Alternative to Built-In Rooms

Ideal for sites that lack internal space or prefer a cost-sensitive alternative to built-in rooms, the FIELDCLIMA Series offers a plug-and-play route to extra climate-controlled capacity. It requires no structural work and causes no disruption to existing laboratories and production areas.

Key Features

  • Mobile walk-in stability rooms in 20 ft (~22,000 L) and 40 ft (~40,000 L) containers, ready for outdoor or indoor installation.
  • Stability-grade climate performance, with temperature from 15 ºC to 45 ºC and humidity from 35% to 90% rH, with tight fluctuation and uniformity.
  • High-efficiency shelving included as standard, with modular aluminium racks (5 tiers per module) and up to 150 kg load per shelf.
  • ClimaPlus controller and FitoLog software, alarms, remote notifications and IQ/OQ/PQ and ISO calibration options for GxP-compliant environments.

Rugged, Insulated Construction

Each unit is built around a reinforced ISO shipping container with a marine epoxy coating and an insulated inner chamber using 60 mm polyurethane panels. A slip-resistant protected floor and an insulated inner door with safety opening complete a durable, walk-in environment designed for demanding pharmaceutical, food, archive and controlled-storage applications.

Technical Specifications


Interior Volumes
  • FieldClima Stability 22 PH: 22 000 L (22 m³)
  • FieldClima Stability 40 PH: 40 000 L (40 m³)

Approximate Storage Area
  • FieldClima 22 PH: 14 m²
  • FieldClima 40 PH: 21 m²

Environmental Control
  • Temperature range: 15 ºC to 45 ºC (extensions available on request)
  • Temperature fluctuation in time: ± 0.5 ºC
  • Temperature uniformity in space: ± 1.0 ºC
  • Humidity range: 35% to 90% rH
  • Humidity fluctuation in time: ± 1% rH
  • Humidity uniformity in space: ± 2.5% rH

Shelves and Storage
  • Modular anodised aluminium racks with polyethylene shelves, 5 tiers per module; additional tiers can be added
  • Maximum load 150 kg per shelf (evenly distributed)

Lighting and Airflow
  • Ceiling-mounted linear LED lighting, operated by switch, door trigger or controller programme
  • Dynamic airflow with adjustable velocity set-point on the ClimaPlus controller for uniform temperature and humidity across all shelves

Construction
  • Reinforced ISO shipping container with marine epoxy coating
  • Insulated inner chamber with 60 mm polyurethane panels
  • Slip-resistant protected floor and insulated inner door with safety opening

Connections
  • 400 VAC, 50 Hz, 3-phase + N + PE supply
  • ¾” demineralised water inlet
  • 50 mm floor drain
  • RJ45 Ethernet port for networking

Controller and Software
  • ClimaPlus controller with FitoLog software
  • Alarms and remote notifications
  • IQ/OQ/PQ and ISO calibration options for GxP-compliant environments

Frequently Asked Questions

What container sizes and volumes are available?
The FIELDCLIMA Stability Series is offered in two configurations: the 22 PH built into a 20 ft container with approximately 22,000 L (22 m³) of interior volume and about 14 m² of storage area, and the 40 PH built into a 40 ft container with approximately 40,000 L (40 m³) and about 21 m² of storage area.
What temperature and humidity conditions can the chamber hold?
The standard climate range is 15 ºC to 45 ºC (extensions available on request) and 35% to 90% rH. Temperature fluctuation in time is ± 0.5 ºC with spatial uniformity of ± 1.0 ºC, while humidity fluctuation in time is ± 1% rH with uniformity of ± 2.5% rH.
Can it be installed outdoors?
Yes. The room is integrated into a reinforced ISO shipping container with marine epoxy coating and an insulated inner chamber, so it can be installed either outdoors or indoors as a plug-and-play unit without structural work or disruption to existing laboratories and production areas.
What shelving and load capacity does it provide?
It comes standard with modular anodised aluminium racks fitted with polyethylene shelves, 5 tiers per module, and additional tiers can be added. Each shelf supports a maximum evenly-distributed load of 150 kg.
Is it suitable for regulated, GxP applications?
Yes. The ClimaPlus controller with FitoLog software provides alarms, remote notifications and full electronic records, and IQ/OQ/PQ and ISO calibration options are available to support GxP-compliant pharmaceutical and regulated environments.
What site connections are required?
The unit requires a 400 VAC, 50 Hz, 3-phase + N + PE electrical supply, a ¾” demineralised water inlet, a 50 mm floor drain, and an RJ45 Ethernet port for networking.

Request a quote for FIELDCLIMA Stability Series Container Room - Aralab

Fill out the form, give us a call or send an email and we will contact you as soon as possible.

Back to all products